Open and Closed-Cell Spray Foam – Energy Fox Solutions

Energy Fox Solutions

HIGH-QUALITY SPRAY FOAM MATERIAL

At Energy Fox Solutions, we only carry high-quality foam materials from major manufacturers that have been fully tested with proper reporting for each formulation.

We sell some of the strongest insulating materials on the market today that are utilized to insulate a wide variety of residential, commercial, and industrial buildings and structures, providing our customers with some of the best spray foam materials on the market for wall and roofing applications, coatings and leveling, along with many other applications.

Below, you will find a list of the spray foam insulation materials that we currently offer. If you don't see a particular type you are looking for, please reach out to us and we will look into it for you! We are continually adding more products.

OPEN-CELL SPRAY FOAM MATERIAL

Select a tab below to learn more.

UPC 400

NO-MIX OPEN-CELL SPRAY FOAM

UPC 400™ is our next-generation open-cell spray foam designed for maximum efficiency and performance. With a no-mix, ready-to-use formula, it simplifies installation while delivering exceptional yield and superior thermal performance. Boasting an R-value of 4.0 at 1 inch. UPC 400™ provides enhanced energy savings and coverage, making it an ideal choice for contractors seeking both speed and value.

FEATURES:

R-value of 4.0 at 1”
Yield Up To 20,000 Board Feet
Contains no CFCs, HCFCs, or GWP Blowing Agents
Eco-friendly Air Sealing
Easy-to-install, No-Mix, No-Fuss Formula
Intertek CCRR Accredited
Intertek Clean-Air Gold Certified

UPC 400 TECHNICAL DATA SHEET

UPC 500 CLASSIC

UPC'S CLASSIC OPEN-CELL SPRAY FOAM

UPC's original half-pound open-cell foam. A no-mix, no-fuss formula that provides consistent, high-quality performance. Insulates and seals all cracks, gaps, and voids with a seamless, custom-fit insulation. Unlike traditional factory-made insulation products, UPC 500 will not lose its shape or thermal-resistance performance over time. A cost-effective, air-impermeable insulation solution for residential, commercial, and institutional applications.

FEATURES:

R-value of 4.2 at 1”
Yield Up To 18,000 Board Feet
Sustainable R-Value
Eco-friendly Air Sealing
Easy-to-install, No-Mix, No-Fuss Formula
Intertek CCRR Accredited
Intertek Clean-Air Gold Certified

UPC 500 TECHNICAL DATA SHEET

UPC 500 MAX

ULTRA HIGH-YIELD OPEN-CELL SPRAY FOAM

UPC’s acclaimed high-yield open-cell foam, the 500 Max, is a result of years of collaboration between our chemists and industry-leading sprayers. Designed with the sprayer in mind, it sets a new standard for ease of use and performance. It’s the most cost-effective spray foam solution with minimal mixing required, an exceptionally consistent appearance, and incredible controllability.

FEATURES:

R-value of 3.9 at 1”
Yield Up To 21,000 Board Feet
Contains no CFCs, HCFCs, or GWP Blowing Agents
Easy-to-install Formula
Intertek CCRR Accreditation
Intertek Clean-Air Gold Certified
Approved for use in attics and crawlspaces with NO additional coating

UPC 500 MAX TECHNICAL DATA SHEET

UPC 500 MAX PRO

ULTRA HIGH-YIELD OPEN-CELL SPRAY FOAM

UPC’s acclaimed high-yield open-cell foam, the 500 Max Pro, is a result of years of collaboration between our chemists and industry-leading sprayers. Designed with the sprayer in mind, it sets a new standard for ease of use and performance. It’s the most cost-effective spray foam solution with minimal mixing required, an exceptionally consistent appearance, and incredible controllability.

FEATURES:

R-value of 3.9 at 1”
Yield Up To 21,000 Board Feet
Contains no CFCs, HCFCs, or GWP Blowing Agents
Easy-to-install Formula
Intertek CCRR Accreditation
Intertek Clean-Air Gold Certified
Approved for use in attics and crawlspaces with NO additional coating

UPC 500 MAX PRO TECHNICAL DATA SHEET

UPC 500 OCX

APPENDIX X OPEN-CELL SPRAY FOAM

UPC’s 500 OCX is making waves in the Appendix X spray foam market! This sucrose-based formula sprays like a traditional open-cell foam, without clogging the gun, and with exceptional yield. Its chemistry allows for consistent on-ratio spraying and exceptional controllability. Sprayers praise the 500 OCX as the easiest “sugar” based foam to work with. For design professionals, the 500 OCX is one of the few low-density fire-rated formulas to pass the AC377 Appendix X, allowing for exposed foam in design assemblies where ignition barriers are required.

FEATURES:

R-value of 3.7 at 1”
Yield Up To 18,000 Board Feet
AC377 Appendix X-approved With NO Coating
Superior Fire Rating
Eco-friendly, Sucrose-based
Easy-to-install Formula
Intertek CCRR Accredited
Intertek Clean-Air Gold Certified

UPC 500 OCX TECHNICAL DATA SHEET

CLOSED-CELL SPRAY FOAM MATERIAL

UPC 2.0 HFO

LOW GWP CLOSED-CELL SPRAY FOAM

UPC’s 2.0 HFO is an ultra-low GWP closed-cell foam offering incredible sprayability due to its next-generation blowing agent formulation. Design professionals and contractors should note that the outstanding yield makes this product one of the most cost-effective closed-cell spray foams available while being environmentally responsible.

FEATURES:

R-value of 7.6 @ 1”
Yield Up To 4,700 Board Feet
Formulated for Up To 3” Pass Thickness
AC377 Appendix X Approved with NO Coating
HFO 1233zd Technology
Contains no CFCs or HCFC Blowing Agents
Easy-to-install Formula
Intertek CCRR Accredited
Intertek Clean-Air Gold Certified

UPC 2.0 HFO TECHNICAL DATA SHEET

UPC 2.0 HFO MAX

HIGH-YIELD LOW GWP CLOSED-CELL SPRAY FOAM

UPC’s 2.0 HFO Max is a groundbreaking high-yield formula designed for efficient insulation practices. It offers ease of use and cost-effectiveness, making it an ideal choice for residential, commercial, and institutional applications that require air-impermeable insulation solutions.

FEATURES:

R-value of 7.9 @ 1”
Yield Up To 5,000 Board Feet
Formulated for Up To 3” Pass Thickness
AC377 Appendix X Approved With NO Coating
HFO 1233zd Technology
Contains no CFCs or HCFC Blowing Agents
Easy-to-install Formula
Intertek CCRR Accredited
Intertek Clean-Air Gold Certified

UPC 2.0 HFO MAX TECHNICAL DATA SHEET

UPC 2.0 HIGH-LIFT HFO

HIGH-LIFT CLOSED-CELL SPRAY FOAM

UPC 2.0 High Lift HFO closed-cell spray foam is based on the 3rd generation and offers one of the highest R-values per inch. UPC customers can save material and labor costs with fewer products required to meet stringent R-value requirements. UPC 2.0 High Lift HFO is a drop-in place replacement for HFC blown foams.

FEATURES:

R-value of 7.9 @ 1”
Yield Up To 5,000 Board Feet
Formulated for Up To 4” Pass Thickness
Appendix X Approved
Contains no CFCs or HCFC Blowing Agents
GWP of 1
Easy-to-install Formula
Intertek CCRR Accredited
Intertek Clean-Air Gold Certified

UPC 2.0 HIGH-LIFT HFO TECHNICAL DATA SHEET

Get in touch!

If you can't find a particular brand or specific material you are looking for or if you just have a question, please feel free to reach out and we will look into it for you.

(855) 715-7862