Everoof Primers

Everoof primers improve topcoat adhesion to the roof surface, seal porous or uneven substrates, protect against moisture and rust, and prevent stains from bleeding through the coating. They provide a stable, uniform surface that enhances the overall durability and longevity of the roof coating system. Everroof offers a range of roofing primers suitable for various substrates and application methods.

EVERROOF® PRIMERS

EVERROOF® PRIMER U11 (Polyurethane Based)
EVERROOF® PRIMER M25 (Acrylic Based)
EVERROOF® PRIMER M40 (Water-Based)
EVERROOF® PRIMER M55 (Modified Alkyd Metal)
EVERROOF® PRIMER M100 (Epoxy-Water Based)

SELECT A PRODUCT BELOW TO LEARN MORE.

EVERROOF® PRIMER U11

Everroof Primer U11 is a two-component, high solids, liquid-applied primer with unique penetrating characteristics.

FEATURES & BENEFITS

• High Solids
• Fast Re-Coat Time
• Low Odor
• Low Viscosity

TYPICAL USES

• Intercoat adhesion and re-coat primer for existing urethane systems.
• When combined with EVERROOF Base Accelerator, EVERROOF Primer U11 may be used as a quick-drying concrete primer.

PLEASE, CALL FOR PRICING: (855) 715-7862

TECHNICAL DATA SHEET

EVERROOF® PRIMER M25

Everroof Primer M25 is a waterborne, modified acrylic primer specifically designed as a bleed-blocking primer over modified bitumen and asphalt BUR roofs prior to the application of a new layer of Acrylic or silicone topcoat.

RECOMMENDED USES

• Asphalt BUR Surfaces
• Modified Bitumen Surfaces

PLEASE, CALL FOR PRICING: (855) 715-7862

TECHNICAL DATA SHEET

EVERROOF® PRIMER M40

Everroof Primer M40 is a water-based, acrylic-metal primer designed for use on steel surfaces. Primer M40 is an interior and exterior metal maintenance primer that is free of heavy metal hazards.

FEATURES & BENEFITS

• Fast Drying
• VOC (less than 100 gms/liter)
• Rust Inhibitive

RECOMMENDED USES

• Blasted Steel
• Ferrous Metal
• Galvanized Metal
• Non-Ferrous Metals

PLEASE, CALL FOR PRICING: (855) 715-7862

TECHNICAL DATA SHEET

EVERROOF® PRIMER M55

Everroof Primer M55 is a high-solids, red-oxide alkyd metal primer for steel surfaces, which is fast-drying, has low VOC (less than 340 g/L), is rust-inhibitive, and is free of heavy metal hazards. It is easy to apply by brush, spray, or roller, and has good resistance to general atmospheric weathering. It can be top-coated with alkyd and latex coatings, as well as urethane foam or coatings.

FEATURES & BENEFITS

• Fast Drying Maintenance Primer
• Interior & Exterior Use
• Lead, Chromate, and Barium-Free Pigmentation

PERFORMANCE INFORMATION

• Abrasion Resistant
• Good Corrosion & Rust Undercutting Protection
• Primer for Use Under a Variety of Latex, Alkyd, and Urethane Topcoats

PLEASE, CALL FOR PRICING: (855) 715-7862

TECHNICAL DATA SHEET

EVERROOF® PRIMER M100

Everroof Primer M100 is a two-component (4:1), liquid-applied, water-based epoxy primer with unique penetrating characteristics and rust-inhibiting properties. It is a substrate adhesive primer and a bleed block suitable over recommended substrates. Primer M100 can be used with all Ever-Crylic and Ever-Silic Restoration Systems.

FEATURES & BENEFITS

• Low Viscosity
• Quick Cure / Re-Coat Time
• Rust Inhibitor
• Substrate Penetrating

TYPICAL USES

• BUR & Aged EPDM Membrane (see TDS)
• Concrete
• Masonry
• Metal
• Modified Bitumen
• Polymers
• Polyurethane Elastomeric Surfaces
• Wood

PLEASE, CALL FOR PRICING: (855) 715-7862

TECHNICAL DATA SHEET

Get in touch!

If you can't find a particular brand or specific material you are looking for or if you just have a question, please feel free to reach out and we will look into it for you.